Chrysler 300M Enthusiasts Club
  • Starting to Research a Big Brake Kit

  • LH Performance Modification Discussions
Ocean City 2019 Banner

Membership Banner

LH Performance Modification Discussions
User avatar
 #361547  by Sneke_Eyez
 September 13th, 2016, 2:07 pm
We can modify the knuckle probably, Keith.
We just need a set of Brembos from an LX (or something else) to try.

If this is something really important to you we can try snagging the knuckles off of my Special parts car or a junkyard car.
M-Pressive liked this
User avatar
 #361550  by M-Pressive
 September 13th, 2016, 3:12 pm
Sneke_Eyez wrote:We can modify the knuckle probably, Keith.
We just need a set of Brembos from an LX (or something else) to try.

If this is something really important to you we can try snagging the knuckles off of my Special parts car or a junkyard car.
That may be a good idea if we can get them.
User avatar
 #361552  by Sneke_Eyez
 September 13th, 2016, 4:22 pm
M-Pressive wrote:
Sneke_Eyez wrote:We can modify the knuckle probably, Keith.
We just need a set of Brembos from an LX (or something else) to try.

If this is something really important to you we can try snagging the knuckles off of my Special parts car or a junkyard car.
That may be a good idea if we can get them.
We can get them - this is why I have a battery impact gun!
User avatar
 #361569  by paintballdude05
 September 14th, 2016, 6:59 am
It probably doesn't matter, but there are two different knuckles for the LH cars. Some early Intrepids and Concordes that had 15" wheels got a different knuckle for smaller brake rotors.
User avatar
 #361572  by Sneke_Eyez
 September 14th, 2016, 8:18 am
paintballdude05 wrote:It probably doesn't matter, but there are two different knuckles for the LH cars. Some early Intrepids and Concordes that had 15" wheels got a different knuckle for smaller brake rotors.
Yeah, I don't even remember the last time I saw one of those in a yard.

Saw a 98 Base though the other day with them and the hubcaps...
User avatar
 #361574  by tafi300M
 September 14th, 2016, 9:01 am
Somebody gimme a defination of "big". Link from snstr auto shows rotors up to 405mm, but $4500 once again. :-(
 #361576  by 00R/T
 September 14th, 2016, 9:51 am
tafi300M wrote:Somebody gimme a defination of "big". Link from snstr auto shows rotors up to 405mm, but $4500 once again. :-(
The SRT rotors are 360mm/350mm F/R.
tafi300M liked this
User avatar
 #363606  by Shawn1301
 December 19th, 2016, 10:11 am
Seen a "suggested post" on Facebook from CIEKA.
They make custom big brake kits, and coil overs. They seem like they would be interested to make a set, not sure on costs as they're unsure of the specs.
https://m.facebook.com/story.php?story_ ... ef=m_notif

I don't have time nor a dry space to take things apart to measure. But they may be a route to go.