Chrysler 300M Enthusiasts Club
  • Need to Lower Rear of Car

  • LH Performance Modification Discussions
Ocean City 2019 Banner

Membership Banner

LH Performance Modification Discussions
 #343819  by nokestev
 March 19th, 2015, 8:18 pm
The rear end of my car sits 2" higher than the front when measured at the wheelwells, and I want to do something about it.

The front seems the correct height (28" at the wheel opening); the rear wheel opening measures 30".

Can anyone give me their wheelwell heights, for reference? My suspension and tires are stock.

All I know is the PO replaced the front struts with Monroe Quick-struts.

Thanks!
User avatar
 #343823  by FIREM
 March 19th, 2015, 9:27 pm
Measured ride height per FSM (specs 29.09+-0.79 front, 29.68+-0.79 rear Fuel full, tire pressure 32)
More like the front is low
 #343906  by nokestev
 March 22nd, 2015, 4:48 pm
Yeah, could be...when swapping out the front struts with quick struts, we're ditching the factory springs for what? Aftermarket springs? Assuming the new ones are supposed to match?

I wouldn't mind lowering the rear down to match the front, so it's a little lowered.

Aside from buying lowering springs all the way around (HR), what sayest thou?