Wifes 00 Intrepid ES (3.2L) had a bad injector so I changed that out early last month. Haven't drove it much, but was getting some excessive crankcase pressure. Was blowing oil out of the dipstick. Is it safe to say I should change the pcv valve? Also found out the hose has a bit of a cut in it, so planning to change that too. What hose is recommended for that? Thanks in advance.
If I am not mistaken the PCV to intake hose, 4663961 is still available (non heater set up)
If not be sure to use and oil or oil vapor rated hose, NOT heater hose as it will swell and turn to mush in the presence of oil. Be sure to also check the air cleaner to crankcase/valve cover hose.