https://www.ebay.co.uk/itm/MERCEDES-BEN ... 3344352786
https://www.ebay.co.uk/itm/FOR-CHRYSLER ... SwgPhe54G5
Bracket form this:
https://www.ebay.co.uk/itm/Stainless-st ... SwboFeg5i8
For brake hoses, You can fit our stock hoses. Just need a bigger copper washer to seal it.
For brake discs from 300c. There is a little trick. Our discs have center hole with diameter of 73,6 mm, and in 300c there is 72,6. You need to lock disc in vice and with the round file expand diameter for proper size.
For steering knuckle You need to cut it to fit bracket. It's tricky to coz, Special knuckle is 5mm thicker than standard. So for that calipers special knuckles are perfect and You just need to cut it to fit, but for standard besides bracket You need to cut spacer 5mm thick with goes between bracket and knuckle. You need to polish surface where bracket will be sitting.
I asked guy who cuts with high pressured water and he can cut bracket, but more than just two.
For brake pads. Disc from 300c is 28mm thick and original disc from mercedes is 32mm thick. You need to cut spacer 2mm thick that You stick between brake pistons and pads.
I think that's it. if I remember something, I will let You know.