Chrysler 300M Enthusiasts Club
  • PROJECT Chevy El Camino

  • A place to talk about your non-LH current or former vehicles.
Membership Banner

A place to talk about your non-LH current or former vehicles.

Moderator: Moderators

User avatar
 #384793  by FIREM
 July 1st, 2020, 7:30 pm
One day short of bringing FIREM back to life a year ago, (viewtopic.php?f=49&t=36395)
The El Camino moves and stops under its own power!

Long Long way to go but its another step in the right direction.
User avatar
 #384797  by EasyRider300M
 July 1st, 2020, 7:43 pm
There goes the neighborhood!
Congrats on getting it running.
 #384802  by StealthM
 July 1st, 2020, 11:55 pm
Ohhhh the neighbors are gunna love you...haha.... rock on brother. Looking good.
User avatar
 #384809  by Sneke_Eyez
 July 2nd, 2020, 10:12 am
Awesome to see that, Bob! Hoping to have a similar video for my wagon before too long.
User avatar
 #385408  by FIREM
 August 8th, 2020, 3:19 pm
Little Update: :( Turns out the FRAME is rotted and rusted so bad it is beyond repair. One body mount completely gone, left side front and rear suspension attaching points Swiss cheese.
(Thought I had already posted this)
Then this happened:
Image
Image
Image
Rolled the frame with suspension and drive train right out from under the body.
Found a frame for $300 but it is 4 hours away. Just happens to be near my buddy in the Greenville area. So he picked it up ( has a utility trailer) and next time they come to visit us I will have the replacement.
Then the Chrysler's will have to live outside for a short time.
Body in one bay, old frame in another and swap drive train /suspension to the "new" frame in the 3rd bay.
EasyRider300M liked this
User avatar
 #385409  by EasyRider300M
 August 8th, 2020, 3:51 pm
:eek Most people would have given up once seeing the frame being non-repairable. But not Bob. You are very ambitious and mechanically talented.
First Lady liked this
User avatar
 #385410  by FIREM
 August 8th, 2020, 4:36 pm
There are already so many new parts already installed it’s hard to give up on this project. Every suspension part including Eibach lowering springs, complete brake system including stainless lines, refurbished dash pad, Holley Carb, Hedders, the list is endless. Even a full set of poly body bushings! The body work and paint was a given, frame was unexpected, but the amount of $$ already in parts made the decision easier.
EasyRider300M, monte4 liked this
User avatar
 #385413  by Sneke_Eyez
 August 10th, 2020, 9:41 am
With all of the new parts and only $300 for a good frame, it seems like a no brainer to swap the frame out and keep going!
User avatar
 #386336  by FIREM
 November 6th, 2020, 8:14 am
Frame Rot : Left rear wheel arch
Image
More Rotten Frame
Image
It was so bad I easily cut it up with a Sawsall, loaded into FIREM and took it to the scrap yard.
Replacement Frame arrived (no pic) got cleaned up and painted.
Pressure washed, wire brushed, acid etched, Rustoleum Primer & Satin Black top coat.
Image
Next transferred everything to the "new" frame.
Front & Rear suspension, Engine, Trans, Brake and Fuel Lines, Steering Box, etc, etc,
Image
Image
Ready to Remount body and frame
Image
Body aligned and installed on frame, reinstalled front clip, and continuing on reassembly.
Obviously this is the "Readers Digest" version of the build. Freeing up rusted hardware, cleaning, painting, restoring parts etc takes a lot of time as you well imagine.
Sneke_Eyez, StealthM, M-Pressive and 1 others liked this
 #386337  by dcsally97
 November 6th, 2020, 10:14 am
Starting to look like a car again. Great work Bob! The poly bushings will be good for the new life of the car.
User avatar
 #386338  by EasyRider300M
 November 6th, 2020, 10:53 am
You could make a mean looking GO-Kart from that, at this stage! :D .
User avatar
 #386344  by First Lady
 November 6th, 2020, 6:31 pm
Wow!!! You’ve been busy filling those retirement days!!!

So awesome to see the progress!!!
 #386346  by StealthM
 November 6th, 2020, 6:39 pm
Looking good Bob.
User avatar
 #386406  by LUNAT1C
 November 10th, 2020, 7:00 pm
Frame-off resto is certainly a way to spend one's retirement days... you must feel perfectly at home and content doing it! Looks great so far.
User avatar
 #386720  by FIREM
 December 4th, 2020, 5:50 pm
Rather than retyping everything here is a link to my build.
Almost street legal!!!
https://www.elcaminocentral.com/threads ... st-2539686
FalKen, M-Pressive, monte4 and 1 others liked this
User avatar
 #387000  by FIREM
 January 10th, 2021, 2:56 pm
Image
Titled, Registered, street legal, 50 miles of tweaking ...
Full details here https://www.elcaminocentral.com/threads ... st-2542343
monte4 liked this
User avatar
 #387004  by LUNAT1C
 January 10th, 2021, 7:31 pm
I see that plug for the M there about the seats :lol:

Looks to be very well sorted now. I was just thinking this afternoon driving around, wondering how far along the project is. Looks to be in an excellent cruiser shape before the bodywork begins.
User avatar
 #387012  by Sneke_Eyez
 January 11th, 2021, 9:09 am
Awesome progress, Bob, congrats on getting her "on the road again!"
User avatar
 #387806  by FIREM
 April 28th, 2021, 10:39 am
Driving the Elco regularly as I slowly make progress on making it look good.
Latest job while I wait for some parts is dressing up the wheels.
From this : Image
To this: Image
Funny thing is I have only seen 1 or 2 M's in my travels and get only very few comments about it.
Everywhere we go in the Elco draws good comments and have seen a few dozen in the area. It will be interesting to see what happens when it looks like something i would actually be proud to say it was mine.
monte4 liked this
 #387811  by StealthM
 April 29th, 2021, 1:20 am
Looking good there Bob....