Chrysler 300M Enthusiasts Club
  • *buying* Clear turn signal lenses

  • Club Members Only may Post an ad to buy or sell something
Ocean City 2019 Banner

Membership Banner

Club Members Only may Post an ad to buy or sell something

Moderator: Moderators

User avatar
 #377293  by Alex Funkhouser
 January 9th, 2019, 12:34 am
Does anyone have clear turn signal lenses for the front bumper and/or mirrors?

You used to be able to get these on eBay, but they have since washed up! Any one have an extra set they'd like to sell?
User avatar
 #377449  by sparky99
 January 19th, 2019, 9:24 pm
i'm pretty sure you can still get the clear mirror lenses through Klearz. The bumper lenses have become very hard to find at this point.

https://klearz.com/products/chrysler
User avatar
 #377473  by remi
 January 21st, 2019, 3:36 am
Hello,

I talked to them a few days ago and they are out of stock, only one smocked set left. So I started working on my own lenses! I have been able to cast one in crystal clear resin, even clearer than the Klearz ones. It has lots of defects for now but I'm sure I could achieve a better result. Alex if you're not in a hurry I can sort something out :)
User avatar
 #377478  by In-trepid
 January 21st, 2019, 11:44 pm
Hey Remy. I have some interest in these as well when you get the process perfected.
Katzchen78 liked this
User avatar
 #377491  by Alex Funkhouser
 January 23rd, 2019, 11:15 am
Remi, if you you can achieve a good cast I would definitely be interested, as would many others I'm sure!

I don't plan on ever giving up the car, so rest assured I'm willing to wait, I'll still be in the market. :)
Katzchen78 liked this
User avatar
 #377674  by Katzchen78
 February 7th, 2019, 10:00 pm
That is brilliant Remi. I wonder if you could use an existing set of regular lenses to 3D print a perfect mold.
User avatar
 #377675  by adu1982
 February 8th, 2019, 4:29 am
I'm gonna jump in too remi but mine would be a bit more involved as it would be for the LHS (aka Concorde). Would that be possible (for bumper )

Sent from my Moto G (5) Plus using Tapatalk

User avatar
 #377693  by remi
 February 9th, 2019, 2:49 am
Alex I guess it could be doable from OEM lenses... making a silicone mold, then pouring resin in the mold.
I haven't reworked on it yet but I will. Because my first try looks clearer than the Klearz I want to make a full set to swap in there ;)

Sent from my ASUS_Z012DA using Tapatalk

User avatar
 #378384  by Alex Funkhouser
 March 24th, 2019, 3:29 pm
Has there been any progress on this so far?
Curious if there's anything we can do to help make it happen :)

Sent from my LGUS997 using Tapatalk

User avatar
 #378427  by remi
 March 26th, 2019, 5:56 am
Haven't had much time lately... Glad you want to help but unfortunately I think there's nothing much to do about it :p