Chrysler 300M Enthusiasts Club
  • LH parts no longer needed updated 11/12

  • Club Members Only may Post an ad to buy or sell something
Membership Banner

Club Members Only may Post an ad to buy or sell something

Moderator: Moderators

User avatar
 #380311  by sparky99
 August 14th, 2019, 9:19 pm
since I've decided to not put any more money in my 300m, I will selling any parts that will not transfer over to my Dodge Intrepid. As I come across parts that are no longer needed, I will be posting them. There may be more later on, but this is what I have pics of at the moment.
at this moment I will sell to who gets money to me first, I prefer not to hold parts as they're taking up valuable

Prices do not include shipping. I will ship anywhere as long as its paid for by the buyer.

Payment through Paypal. sent as friends/family. or cash if parts are picked up.

Items 1&2
300m Dark Slate Winged Clock Bezel and Winged Clock --SOLD!

Item 3
71.5 MM Bored Throttle Body--SOLD!!

Item 4
300m Radio bezel with small "winged" emblem glued to it. --20.00

Glued the emblem to it, I don't want to remove it, so i'll sell it and replace it with a blank piece later on when I do the dash swap.
*NOTE* the ATC and Billet Knob are not coming with the bezel

Image

Item 5
Dark Slate (ProAm) Cluster Bezel --20.00

This came on a Dash I got for my 300m a while ago. I no longer need. The ProAm silver trim has a couple dimples but its in really good shape. I tried to get a picture of the dimples, but I could not get it as they are that small.

Image

Item 6
Puttstick --30.00
it turns your cruise control buttons into shift buttons. I believe its designed for the early M's.

Image

Item 7
Billet 300m grille insert --PENDING
got this and never used it, it will need cleaned up and repainted/powder coated

Image

Item 8
LHS trunk inner strap --SOLD!

Item 9
300m Special Badges --20.00 as pictured 40.00 if you want the plenum badge
I have a plenum badge too, but its on my plenum on my Intrepid. I can pull it off and let it go too if wanted. It'll cost ya though... lol

Image

Item 10
Mopar 300m Trunk Liner PENDING
I bought this from Craig years ago for my car. I can't use it so its going too.
I did cut a few slits for my amp power/ground cables to pass through it and keep the wiring extra clean. It really has no bearing on the liner doing its job. It will be cleaned up before shipment. there is a pic of the cuts I made too.

Image

Image

Item 11
Dodge Neon SXT trunk spoiler -- 25.00
Had this on the car and liked it. it was different, but it would look terrible on the Intrepid
its actually painted with spray paint, so it will need sanded/painted if purchased.

Image

Image

Item 12
Passenger side Black 300m Special mirror --SOLD!!
Got this some time ago, it appears as it might be glued at the base. I cannot confirm that as I have not tried to fold it. Its in good looking shape .



Item 13
Agate Door Lock knobs with Indicator Triangle --20.00
These are getting rare, I just don't see them anymore.

Image

Item 14
1999/ early 2000 Mopar Crank Sensor--20.00
it is used (maybe about 3 months). its out of the green car.

Image

Item 15
300m Sight Shield-- 30.00
got it from the yard to replace mine but I no longer need. There are no breaks/cracks. there is some writing on it from where ever.

Image

Items 16 & 17
LED Flashing Relay --10.00
Modified DRL Module --SOLD

Got the Flasher for the car when running Switchbacks.
The DRL module is sold...

Image




I will be adding to this list. Please keep an eye out!!
 #380315  by 2001Intrepid18
 August 15th, 2019, 2:09 am
I’d be interested in the winged clock bezel :D :D hate that your m is going to be gone:(
 #380316  by Wjbeadle87
 August 15th, 2019, 3:01 am
Wonder if you have the license plate light assembly, shifter assembly, shifter cable?
User avatar
 #380320  by sparky99
 August 15th, 2019, 12:24 pm
Wjbeadle87 wrote: August 15th, 2019, 3:01 am Wonder if you have the license plate light assembly, shifter assembly, shifter cable?
I do have everything. I don’t know about getting the shifter cable out though. I’ve never pulled one. I’ll have to look into it. I could pull the shifter (autostick) and the light assembly
 #380322  by dcsally97
 August 15th, 2019, 3:58 pm
PM sent.
 #380323  by Wjbeadle87
 August 15th, 2019, 5:52 pm
sparky99 wrote:
> [quote=Wjbeadle87 post_id=380316 time=1565856075 user_id=26132]
> Wonder if you have the license plate light assembly, shifter assembly,
> shifter cable?
> [/quote]
>
> I do have everything. I don’t know about getting the shifter cable out
> though. I’ve never pulled one. I’ll have to look into it. I could pull the
> shifter (autostick) and the light assembly


Can you PM me a price shipped to 53813?
User avatar
 #380325  by In-trepid
 August 15th, 2019, 7:58 pm
I am interested in the Winged clock bezel.
User avatar
 #380327  by sparky99
 August 15th, 2019, 10:18 pm
In-trepid wrote: August 15th, 2019, 7:58 pm I am interested in the Winged clock bezel.
pm sent.
User avatar
 #380336  by beespecial
 August 16th, 2019, 11:50 am
Robert, I would like to have the trunk pull.
User avatar
 #380342  by M-Pressive
 August 16th, 2019, 5:34 pm
How are the tail lights?
 #380343  by dcsally97
 August 16th, 2019, 5:36 pm
I was interested in the tails also. I think they are tinted.
User avatar
 #380346  by sparky99
 August 16th, 2019, 9:27 pm
Tails are tinted, but they aren’t “Keith good” lol. I’ll get some pics and post them up as soon as I can.
User avatar
 #380347  by sparky99
 August 16th, 2019, 9:31 pm
StealthM wrote: August 16th, 2019, 5:01 pm Front bumper cover.
I’m really surprised it took this long for someone to ask for it. You have 1st dibs. I will pm you some details.
 #380348  by dcsally97
 August 16th, 2019, 9:36 pm
I'm interested in the tails still.