Page 1 of 1
PostPosted:May 13th, 2020, 12:37 pm
I am thinking about getting a set of 18x10 wheels for my 300m on the super cheap from my work. They are band new just been sitting in the back. But I am wondering if that is too wide for my m. If they are not what size should I put on them.
PostPosted:May 13th, 2020, 3:55 pm
Anything can be done, but in general folks have needed to roll their quarter panels to fit genuine SRT wheels (20x9 with a low offset). 18x10 is probably too wide. 20x9 SRT wheels tend to be very close to the spring perches as it is.
PostPosted:May 13th, 2020, 4:50 pm
Other than the obvious problems mentioned, you have to make sure that the tire itsef is wide enough for the rim. A 10 inch rim probably wants a 300mm tire in order to seal properly. I haven't dabbled with that for years now, but when I was in high school and we were looking to run the widest tires possible, I know some people bought rims that were so wide that the tires didn't fit properly and they were hard to get the bead to pop into place. More often though people would want to run a wide tire on a narrow rim, which also caused a problem.
PostPosted:May 15th, 2020, 12:40 pm
Thanks for the help guys. The 10 Inch turned out to be too wide. So not feeling comfortable with putting spacers on the car I was able to find some 18x8 wheels. Will post pics when mounted.
PostPosted:May 16th, 2020, 12:04 pm
Decided to go with these. I thing they go very well with the car. Gives her the good ol razzle dazzle.
PostPosted:May 16th, 2020, 12:52 pm
Nice! They look good.
PostPosted:May 16th, 2020, 1:31 pm
I like it a lot!! Nice choice!!
PostPosted:May 16th, 2020, 1:39 pm
Always a fan of some nice wheels! Great choice.
PostPosted:May 16th, 2020, 10:20 pm
PostPosted:May 17th, 2020, 1:16 am
Love them. Looks awesome...